How to Clean and Care for Giuseppe Zanotti Seal Boots 90
By GIUSEPPE ZANOTTI | Published: 2026-10-19
Category: Tips & Care
Learn how to clean, condition, and store your Seal Boots 90 to keep the semi-glossy leather and gold-tone seal detail looking sharp.
Quick Answer
To keep your Seal Boots 90 looking their best, clean the semi-glossy leather regularly with a soft, dry cloth, condition it with a leather-specific product, and store the boots upright away from direct sunlight.
Why Semi-Glossy Leather Needs Special Care
The Seal Boots 90 feature a semi-glossy leather finish that can show dust, water spots, and scuffs more easily than matte leather. Using the wrong cleaner—like all-purpose sprays or saddle soap—can strip the finish and leave dull patches.
The gold-tone metal seal detail and wood-effect block heel also need protection. Metal can tarnish if exposed to moisture, and the heel's finish can scratch if knocked against hard surfaces. Gentle, targeted care keeps every part of the boot looking cohesive.
Before You Start: What You'll Need
Gather a soft dry cloth (microfiber works well), a soft-bristled brush (like a horsehair brush), a leather conditioner made for smooth leather, a clean damp cloth, and boot shapers or acid-free tissue paper for storage.
Avoid products containing silicone, alcohol, or harsh solvents, as these can dry out the leather or leave a sticky residue. Always test any new product on a small, hidden area—like the inside of the boot—before applying it to the visible surface.
Step-by-Step Cleaning and Care Routine
- Brush Off Loose Dirt: Use a soft-bristled brush to gently remove dust and dirt from the leather surface, working from the top of the boot down to the heel. Pay extra attention to the area around the zipper and the seal detail. Always brush before wiping to avoid dragging grit across the leather.
- Wipe with a Damp Cloth: Dampen a clean cloth with lukewarm water and wring it out well. Gently wipe the entire leather surface to remove any remaining residue. Avoid saturating the leather, and never submerge the boots. Use minimal water—too much moisture can stain semi-glossy leather.
- Dry Immediately: Pat the boots dry with a soft, dry cloth. Let them air-dry at room temperature away from direct heat or sunlight. Do not use a hairdryer or place them near a radiator, as heat can crack the leather. Never speed-dry with heat; it can ruin the leather's finish.
- Condition the Leather: Apply a small amount of leather conditioner formulated for smooth leather to a clean cloth. Rub it in using circular motions, focusing on areas that bend or crease. Let it absorb for a few minutes, then buff with a dry cloth. Condition sparingly—too much can make the leather sticky and attract dirt.
- Protect the Metal and Heel: Wipe the gold-tone seal detail with a dry microfiber cloth to remove fingerprints. For the wood-effect heel, avoid abrasive cleaners; just wipe with a slightly damp cloth and dry immediately. Keep metal and heel dry to prevent tarnishing and scratches.
- Store Properly: Insert boot shapers or rolled acid-free tissue paper into the boots to help them keep their shape. Store them upright in a cool, dry place away from direct sunlight. Use a dust bag or box to protect them from dust and light. Avoid folding or crushing the boots—this can cause permanent creases.
About the Seal Boots 90
- SEAL BOOTS 90: The Seal Boots 90 are over-the-knee cuissard boots in semi-glossy leather with a square toe and inner zipper for easy fit. The inner zipper makes cleaning easier because you can fully open the boot, but you must protect the zipper from water and conditioner to keep it smooth.
SEAL BOOTS 90 - SEAL BOOTS 90: They feature a wood-effect block heel and a gold-tone metal seal detail with the Graffio logo. The metal detail can tarnish if exposed to moisture, so wipe it dry immediately and avoid getting conditioner on it.
